Refraction and refractive index
FREE PHYSICS REVISION · UNIT 3 · A2.1
Pearson BTEC Level 3 AAQ Applied Science · Issue 7 (May 2026)
Learning objectives
- Describe refraction as a change in wave direction associated with a change in propagation speed.
- Measure incidence and refraction angles from the normal, rather than the boundary.
- Calculate refractive index using n = c/v or, for an air–material boundary, n = sin i/sin r.
- Explain the relationship between refractive index, speed and bending towards or away from the normal.
Specification mapping: A2.1, A2.1.1
Prerequisites: A1.4
Physical principles
Refraction is a change in propagation direction caused by a change of wave speed across a boundary, except at normal incidence where speed changes without bending. Measure incidence i and refraction r from the normal, a line perpendicular to the boundary. For light entering a higher-index material from air, speed decreases and the ray bends towards the normal.
Absolute refractive index n = c/v is dimensionless; c is vacuum light speed and v is the phase speed in the material. For ordinary transparent materials in this course n exceeds one. At a stationary boundary frequency is unchanged, so the wavelength decreases with speed. Optical density refers to refractive index, not necessarily mass density.
For an air–material boundary, taking air index as one, n = sin i/sin r. More generally n₁ sin i = n₂ sin r. The air formula must not be applied blindly to two materials with non-unit incident index. Use degree mode for angles given in degrees. Dispersion means index can depend on wavelength.
Scientific diagram and interpretation

Equations and relationships
n = c/v = sin i/sin r (air incident approximation)
Worked examples and applications
Speed in glass
Take c = 3.00 × 10⁸ m s⁻¹ and n = 1.50. v = c/n = 2.00 × 10⁸ m s⁻¹. Wavelength falls to 1/1.50 of its vacuum value.
Angle of refraction
From air into n = 1.50 glass at i = 30.0°: sin r = sin 30.0°/1.50 = 0.3333; r = sin⁻¹(0.3333) = 19.5°. The smaller angle confirms bending towards the normal.
Common misconceptions
Angles measured from the surface give the wrong sine ratio. Frequency does not decrease on entry.
Examination technique
Draw and label the normal before calculating angles.
For an explanation, connect the physical cause to its effect. For a calculation, state the model, rearrange before substitution, retain intermediate digits, and finish with units. For a data question, refer to the actual readings and distinguish a trend from proof of a cause.
Check your understanding
Five questions. Choose an option, then Check Answer. Read the feedback and use Try Again to reset. Use Tab between controls, arrow keys within radio groups, and Enter or Space on buttons. These local practice answers are not saved.
Take Your Learning Further
Practise
Build Your Confidence
Reinforce your understanding with our topic-based workbook. Every workbook page links back to its matching online lesson, so you can revisit explanations whenever you need support.
Explore Workbook – PhysicsMaster
Get Exam Ready
Apply your knowledge with exam-style practice papers and detailed mark schemes. Identify what you’ve mastered and what to revise next.
Practice Papers – PhysicsEXAM RESOURCES
Physics exam resources
Apply your knowledge with written practice.
Browse exam resources