Acceleration from velocity–time gradients

B1.3.6 · Unit 3 PhysicsPearson BTEC Level 3 AAQ Applied Science
Unit 3 · B1.3.6

FREE PHYSICS REVISION · UNIT 3 · B1.3.6

Pearson BTEC Level 3 AAQ Applied Science · Issue 7 (May 2026)

Learning objectives

  • Define acceleration as the rate of change of velocity.
  • Calculate average acceleration using a = (v − u)/t with a consistent sign convention.
  • Determine acceleration from the gradient of a velocity–time graph, using a tangent where necessary.
  • Distinguish negative acceleration from decreasing speed by considering the direction of velocity.

Specification mapping: B1.3.6

Prerequisites: B1.3.4

Physical principles

Acceleration is rate of change of velocity. Over an interval, average acceleration a = (v − u)/Δt. For constant acceleration this value applies throughout the interval. On a velocity–time graph the gradient gives acceleration; a tangent is required for instantaneous acceleration on a curve.

Choose one positive direction and use signed velocities. If velocity changes from −5 to −1 m s⁻¹, acceleration is positive even though motion remains negative: speed decreases. If velocity changes from −1 to −5 m s⁻¹, acceleration is negative and speed increases.

The units m s⁻² arise from (m s⁻¹)/s. A steep velocity–time gradient means large acceleration magnitude. A line of zero gradient means zero acceleration, which can occur at a non-zero velocity. Do not confuse a horizontal graph with an object being stationary unless the graph itself is at v = 0.

Scientific diagram and interpretation

From 0 to 2 s velocity rises uniformly from 0 to 8 m s⁻¹; from 2 to 4 s it remains 8 m s⁻¹. Total area is 8 + 16 = 24 m.
From 0 to 2 s velocity rises uniformly from 0 to 8 m s⁻¹; from 2 to 4 s it remains 8 m s⁻¹. Total area is 8 + 16 = 24 m.

Equations and relationships

a = (v−u)/t

Worked examples and applications

Positive change

u = 5.0 m s⁻¹, v = 17 m s⁻¹, t = 4.0 s. a = (17 − 5.0)/4.0 = 3.0 m s⁻².

Braking direction

With forward positive, a car changes from 20 to 0 m s⁻¹ in 5.0 s. a = (0 − 20)/5.0 = −4.0 m s⁻². The magnitude of deceleration is 4.0 m s⁻².

Common misconceptions

Negative acceleration means acceleration along the negative axis; whether speed rises or falls depends on velocity too.

Examination technique

Use the full velocity change, including signs, before dividing by elapsed time.

For an explanation, connect the physical cause to its effect. For a calculation, state the model, rearrange before substitution, retain intermediate digits, and finish with units. For a data question, refer to the actual readings and distinguish a trend from proof of a cause.

Check your understanding

Five questions. Choose an option, then Check Answer. Read the feedback and use Try Again to reset. Use Tab between controls, arrow keys within radio groups, and Enter or Space on buttons. These local practice answers are not saved.

Question 1 of 5 · B1.3.6

Velocity changes 4 to 16 m s⁻¹ in 3 s. a is…

Question 2 of 5 · B1.3.6

A horizontal v–t line has acceleration…

Question 3 of 5 · B1.3.6

Changing −5 to −1 m s⁻¹ in 2 s gives…

Question 4 of 5 · B1.3.6

Instantaneous acceleration on a curved v–t graph is…

Question 5 of 5 · B1.3.6

Acceleration and velocity in the same direction cause speed to…

Take Your Learning Further

Practise

Build Your Confidence

Reinforce your understanding with our topic-based workbook. Every workbook page links back to its matching online lesson, so you can revisit explanations whenever you need support.

Explore Workbook – Physics

Master

Get Exam Ready

Apply your knowledge with exam-style practice papers and detailed mark schemes. Identify what you’ve mastered and what to revise next.

Practice Papers – Physics