Electrical energy: E = VIt
FREE PHYSICS REVISION · UNIT 3 · C2.1.4
Pearson BTEC Level 3 AAQ Applied Science · Issue 7 (May 2026)
Learning objectives
- Calculate electrical energy transferred using E = VIt for stated constant operating conditions.
- Rearrange the relationship to determine voltage, current or operating time.
- Convert prefixes and durations so that the calculated energy is expressed in joules.
- Explain the assumptions needed when using single voltage and current values over a time interval.
Specification mapping: C2.1.4
Prerequisites: C2.1.1, C2.1.3
Physical principles
Combining P = VI with E = Pt gives E = VIt for constant voltage and current, or suitable average power. The energy transferred depends on all three factors. With volts, amperes and seconds the result is joules, because V A = W and W s = J.
Rearrange to t = E/(VI), I = E/(Vt) or V = E/(It). Include brackets in calculator input so the full denominator is used. Convert mA to A, minutes to seconds and kJ to J. A 12 V supply does not imply that every individual component in series has 12 V across it.
In calorimetry, VIt is the electrical energy supplied to the heater. Not all necessarily reaches the sample: the heater, container and surroundings may absorb some. For varying voltage or current, measure power over time and sum or integrate appropriately rather than multiplying unrelated averages.
Scientific diagram and interpretation

Equations and relationships
E = VIt
Worked examples and applications
Heater energy
A heater has V = 12 V, I = 2.0 A and t = 180 s. E = VIt = 12 × 2.0 × 180 = 4320 J ≈ 4.3 kJ.
Required duration
To supply 3600 J at 6.0 V and 2.0 A, t = E/(VI) = 3600/(6.0×2.0) = 300 s.
Low current
A 3.0 V sensor draws 20 mA = 0.020 A for 60 s. E = 3.0 × 0.020 × 60 = 3.6 J.
Common misconceptions
Electrical input energy and thermal energy gained by a sample differ when losses or container heating are significant.
Examination technique
State whether a calculated value is input energy or useful transferred energy.
For an explanation, connect the physical cause to its effect. For a calculation, state the model, rearrange before substitution, retain intermediate digits, and finish with units. For a data question, refer to the actual readings and distinguish a trend from proof of a cause.
Check your understanding
Five questions. Choose an option, then Check Answer. Read the feedback and use Try Again to reset. Use Tab between controls, arrow keys within radio groups, and Enter or Space on buttons. These local practice answers are not saved.
Take Your Learning Further
Practise
Build Your Confidence
Reinforce your understanding with our topic-based workbook. Every workbook page links back to its matching online lesson, so you can revisit explanations whenever you need support.
Explore Workbook – PhysicsMaster
Get Exam Ready
Apply your knowledge with exam-style practice papers and detailed mark schemes. Identify what you’ve mastered and what to revise next.
Practice Papers – PhysicsEXAM RESOURCES
Physics exam resources
Apply your knowledge with written practice.
Browse exam resources