Newton’s second law and momentum change

B2.5 · Unit 3 PhysicsPearson BTEC Level 3 AAQ Applied Science
Unit 3 · B2.5

FREE PHYSICS REVISION · UNIT 3 · B2.5

Pearson BTEC Level 3 AAQ Applied Science · Issue 7 (May 2026)

Learning objectives

  • Relate resultant force to the rate of change of momentum.
  • Calculate average force, momentum change or interaction time using Favg = (mv − mu)/t.
  • Apply F = ma to constant-mass situations and connect it to the momentum relationship.
  • Interpret force direction and distinguish an interval’s average force from a potentially larger peak force.

Specification mapping: B2.5, B2.5.1

Prerequisites: B2.4, B1.3.6

Physical principles

Newton’s second law relates resultant external force to the rate of change of momentum. Over a finite interval, average resultant force is Δp/Δt. For constant mass this becomes Favg = m(v−u)/Δt; if acceleration is constant, F = ma. Use the resultant, not one arbitrary force in isolation.

Force is proportional to acceleration when mass is fixed and inversely related to the time needed for a specified momentum change. The relation F = ma is vectorial: acceleration points along the resultant force. If forward drive and backward resistance both act, subtract them before using the mass.

A short impact often has varying force. Δp/Δt gives average force, not automatically the peak. An impulse is the momentum change and equals the area under the force–time graph. The constant-mass form is suitable for ordinary vehicle and object problems here; systems shedding significant mass need more careful modelling.

Scientific diagram and interpretation

Weight acts downward, normal reaction upward, drive right and resistance left. Horizontal arrows need not balance; N = mg only under the stated vertical conditions. Schematic lengths are not force values.
Weight acts downward, normal reaction upward, drive right and resistance left. Horizontal arrows need not balance; N = mg only under the stated vertical conditions. Schematic lengths are not force values.

Equations and relationships

Favg = (mv−mu)/t; F = ma

Worked examples and applications

Resultant and acceleration

Drive = 2400 N, resistance = 600 N and mass = 1200 kg. Fnet = 1800 N forward. a = Fnet/m = 1800/1200 = 1.5 m s⁻² forward.

Average stopping force

A 1000 kg car slows from +20 to 0 m s⁻¹ in 5.0 s. Favg = 1000(0−20)/5.0 = −4000 N. The force is opposite to the initial motion.

Rearrange for time

For a momentum-change magnitude of 600 N s and average force magnitude 150 N, Δt = |Δp|/|Favg| = 4.0 s.

Common misconceptions

An impact-force calculation from total momentum change gives an average unless the force is constant.

Examination technique

Draw the free-body diagram, find the vector resultant and then apply the law.

For an explanation, connect the physical cause to its effect. For a calculation, state the model, rearrange before substitution, retain intermediate digits, and finish with units. For a data question, refer to the actual readings and distinguish a trend from proof of a cause.

Check your understanding

Five questions. Choose an option, then Check Answer. Read the feedback and use Try Again to reset. Use Tab between controls, arrow keys within radio groups, and Enter or Space on buttons. These local practice answers are not saved.

Question 1 of 5 · B2.5

A 5 kg mass under a 20 N resultant has a =…

Question 2 of 5 · B2.5

Which force enters F = ma?

Question 3 of 5 · B2.5

A momentum change 12 N s over 0.30 s gives average force magnitude…

Question 4 of 5 · B2.5

For fixed mass, doubling resultant force gives…

Question 5 of 5 · B2.5

An average force calculation reveals peak force?

Take Your Learning Further

Practise

Build Your Confidence

Reinforce your understanding with our topic-based workbook. Every workbook page links back to its matching online lesson, so you can revisit explanations whenever you need support.

Explore Workbook – Physics

Master

Get Exam Ready

Apply your knowledge with exam-style practice papers and detailed mark schemes. Identify what you’ve mastered and what to revise next.

Practice Papers – Physics